Subtotal $0.00
Silene™
Product Information
Technical Data
| Specification | Description |
|---|---|
| Stent Design | Direct-Stent® - Patented Hybrid Cell Design |
| Stent Material | L605 Cobalt Chromium Alloy |
| Stent Covering Polymer | ePTFE Microporous Polymer, IND 90 - 120 μm |
| Wall Thickness | 0.08 mm/0.003" |
| Balloon System | Over the Wire (OTW) |
| Balloon Material | Semi-Compliant - Nylon Blend |
| Optimal Deployment Pressure | 9 ATM |
| **Nominal Pressure | 7 ATM |
| Rated Burst Pressure | 10 ATM |
| Shaft Size | 5/6F |
| *Minimum Sheath Size | Ø6 - 7 mm: 6Fr; Ø8 - 9 mm: 8Fr; Ø10 - 12 mm: 9Fr |
| Pre-mounted Profile | 1.7 - 3.0 mm |
| Tip Entry Profile | 0.039" |
| Recommended Guidewire | 0.035" |
| Delivery Catheter Length | ~ 130 cm |
| Stent Length | 14 - 70 mm |
| Stent Ends Flaring | 6, 7 → 9 mm; 8, 9, 10 → 14 mm; 12 → 16 mm |
| Radial Force | 10 - 9 mm | 2.0 N Force |
* See individual manufacturer for Sheath Size Fr equivalent.
** Assure full deployment of stent. Deployment pressures should be based on lesion characteristics.
Technical data should be read with the applicable approved Instructions for Use. Specifications and availability may vary by market.
Configurations
Ordering Information
| Stent Diameter (mm) | Stent Length (mm) | Ordering Number |
|---|---|---|
| 6.0 | 15, 25, 35, 50, 70 | 7560XX |
| 7.0 | 15, 25, 35, 50, 70 | 7570XX |
| 8.0 | 15, 24, 32, 50, 70 | 7580XX |
| 9.0 | 15, 24, 32, 50, 70 | 7590XX |
| 10.0 | 15, 23, 31, 48, 65 | 75100XX |
| 12.0 | 14, 23, 31, 48, 65 | 75120XX |
XX denotes the selected length, including a leading zero where shown. Example: 6.0 mm diameter × 15 mm length: 756015.
Confirm configurations and ordering information against the current approved product documentation.